A smooth style for Godzilla.
It’s nice to be the king, and this R35 Nissan GT-R is king of performance and style with its super clean look and COR Encor forged wheels. The GT-R may have unbelievable performance and power figures thanks to that potent engine beneath the hood, but its smooth and clean style is what really helps to steal the show.
Built by Kings Performance, this Nissan GT-R owned by longtime customer, Tariq, was given a fresh dose of power, performance, and prestige thanks to an array of modifications that set it apart from the average GT-R.
Things start out with a lightweight and aerodynamic body kit that drastically alters the look of the GT-R. A Seibon GT-style carbon fiber hood reduces weight and helps dissipate heat from the engine while a Top Racing front end creates a unique and aerodynamically-optimized front fascia. Instead of the large factory rear spoiler, the GT-R was equipped with a subtle RevoZport carbon fiber trunklid with spoiler lip and lower diffuser from Wald to increase downforce for better overall performance at high speeds.
From there, the Nissan GT-R by Kings Performance starts to get really interesting. Godzilla was given a new set of COR Wheels that complete the clean look of the super car. The Encor wheels from the Concave Series were chosen for the GT-R with their high-strength forged aluminum alloy construction. Each wheel was installed with a concave and step-lip design that creates the appearance of muscle and power, and given tinted clear centers, polished outer lips, and silver inners along with OEM GT-R caps. The Encor wheels were fitted in a wide 21 x 10 front and 21 x 11 rear setup with 265/35/21 front and 305/30/21 performance tires for a dynamic footprint. To complete the stance, Kings Performance installed a new Cobb Coilover sleeve kit. Cor Wheels Gtr
The upgraded exterior and wheel fitment created the perfect platform for an modified and tuned engine. The twin-turbocharged 3.8-liter V-6 was given a big boost of power thanks to a variety of modifications installed by Kings Performance. Air is sucked in through a KP three-inch Intake kit, boosted through both of the stock turbochargers and spit out through the new exhaust system comprised of a TiTek 90mm SS downpipe, Cobb 90mm SS midpipe, and AAM 90mm SS sport exhaust with titanium tips. A Forge wastegate actuator, ID1000cc injector set, FBM 270 lph Intank pump, and Cobb Access with TCM help boost power all the way up to 623 whp and 670 lb-ft. of torque using racing fuel. What’s that mean? A 10.5 @ 137mph on M/T Drag Radials quarter-mile run!
Inside, things have been modified for performance. A set of Bride seats help to keep occupants held in place along with new Takata seat belts. To ensure safety, a TMS four-point roll bar was installed to finish off the interior upgrades.
The R35 Nissan GT-R may not be the most powerful or the fastest, but you can guarantee it’s the king of speed and style with it’s COR Wheels and Kings Performance upgrades!
Nissan GT-R Specifications
Nissan GT-R Wheels & Tire Fitment
Wheels: COR Encor forged with concave design and step-lip construction
Finish: Tinted clear centers, polished outers, and silver inners with GT-R center caps
Front Wheels: 21 x 10.0
Rear Wheels: 21 x 11.0
Front Tires: 265/35/21
Rear Tires: 305/30/21
-KP three-inch Air Intake kit
-TiTek 90mm SS Downpipe
-Cobb 90mm SS Midpipe
-AAM 90mm SS Sport Exhaust w/ Titanium tips
-Forge Wastegate Actuator
-ID1000cc injector set
-FBM 270 lph Intank pump x 2
-Cobb Access w/ TCM
-Cobb Coilover sleeve kit
-Seibon GT-style CARBON hood
-Top Racing front racing
-Revo Sport Carbon Fiber trunk
-Wald rear diffuser
-Takata seat belts
-TMS four-point roll bar
-623whp & 670tq on Race Gas
-Best E/T 10.5 @ 137mph on M/T Drag Radials
Hat Tip to the guys at Kings Performance for the build